WSRV 03.1 to 04.3Roll bending machine with manual drive

These robustly constructed roll bending machines are especially suitable for use in workshops and on building sites.

They are driven by a handcrank directly on the bottom shaft. The working shafts are arranged asymmetrically, spherically turned, and are held in place by maintenance-free, dry plain bearings. The clutch gears are to the left, so that even narrow pipes can be easily pulled off.

The top shaft can be swung out one-handed toward the front and is locked by a closed blocking bearing. The bottom and back shafts can be adjusted from the right, outer side of the machine. The bottom shaft advances via handle and hand levers, the back shaft advances via ratchet lever and tooth segment. The settings can be easily reproduced via the sensitive tooth segment. The back shaft can be tilted for conical rounding.

  • Continuously adjustable back shaft via handwheel with position indicator (see figure)
    WSRV-03-detail
  • lock seam groove in top shaft
  • grooves for laying wires
  • transport device for safe transport with forklift or lifting truck
  • Back gear with ratio 1:4

Technical data

TypeWSRV 03.1WSRV 03.2
Shaft-Ømm5555
Working lengthmm10201270
Sheet thicknessmm1,251,00
Net weight approx.kg140165
TypeWSRV 04.1WSRV 04.2
Shaft-Ømm6565
Working lengthmm10201270
Sheet thicknessmm1,501,25
Net weight approx.kg160185
TypeWSRV 03.3
Shaft-Ømm65
Working lengthmm1520
Sheet thicknessmm1,00
Net weight approx.kg218

(Subject to constructional changes!)

How can we help you?

We will advise you individually and help you with your projects.