WSRM 03.1 to 04.3Roll bending machine with motor drive

These roll bending machines are standardly equipped with a Driving power for 2 working speeds and with a 3-shaft Driving power.The machine is driven by a pole-changing transmission brake motor over chain transmission to the back gears. The Driving power motor is thermally protected at both speeds.

The electric safety control is equipped with: Foot switch with integrated EMERGENCY STOP function for forward and reverse EMERGENCY STOP rip cords on the front and back sides of the machine.

The main switch, the manual switch for the speed preselection as well as the CEE plug connection with phase reverser are in the control cabinet.

The working shafts are arranged asymmetrically, spherically turned, and are held in place by maintenance-free dry plain bearings. The top shaft can be swung out toward the front and is locked by a closed blocking bearing. The back gear and the clutch gears are to the left, so that even narrow pipes can be easily pulled off.

Ratched lever and tooth segment

Continuously adjustable back shaft via handwheel

  • naturally hard, approx. 1000 N/mm²
  • hardened
  • mat chronium plated
  • rubberized
  • plastic-coated
  • Continuously adjustable back shaft via handwheel with position indicator (see figure)
  • Other working speeds
  • Transport device for safe transport with forklift or lifting truck
  • Shaft finger protection

Technical data

For all types:
Working speed:6 /12 m/min
Connection voltage:3x 400V / 50 Hz
Driving power:0,75 / 1,1 KW
TypeWSRM 03.1WSRM 03.2
Shaft-Ømm5555
Working lengthmm10201270
Sheet thicknessmm1,251,00
Net weight approx.kg175215
TypeWSRM 04.1WSRM 04.1 / 45
Shaft-Ømm6565
Working lengthmm10201020
Sheet thicknessmm1,500,80
Net weight approx.kg180180
TypeWSRM 04.2WSRM 04.3
Shaft-Ømm6565
Working lengthmm12701520
Sheet thicknessmm1,251,00
Net weight approx.kg230280

(Subject to constructional changes!)