HLSHydraulic rectilinear punching machine

The hydraulic rectilinear punching machine with drives on both sides, type HLS, is used for punching larger workpieces which require a large overhang of the punch, e.g. cuts for back-ventilated lines, trapezoidal sheets, etc.

The sheets to be punched can be pushed through in the cross direction. All shaped cut punching tools (e.g. projecting hole, elongated hole, square, rectangle) can be installed both along and perpendicular to the machine in the punching units provided with an integrated holding-down device.

The pair of mounting bases, on which the punching units are fastened, is set-up at the factory for the desired hole pattern (= number and distance of the holes from the edge of the sheet and with respect to each other).

The punching process is initiated via a movable foot switch. Eyelets for crane transport and runner bracket for the forklift make it easier to transport the machine for use at the building site.

  • Round hole cutting sets
  • Shaped hole cutting sets
  • Angular stop 1600 mm with T-groove strip, 2 continuously variable stop tilting groove strips and support
  • Support consoles 500 mm
  • Support consoles 1600 mm
  • Version A: for tool sizes 2-8 mm²
  • Version B: for tool sizes 3-14 mm²
  • Version C: for tool sizes 5-20 mm²
  • Version D: for tool sizes 20-25 mm²

Technische Daten

TypHLS 1HLS 2
Passage between the columnsmm11401390
Sheet widthmm10201270
Punching forcekN250250
Smallest hole distance per punching unit frommm5050
Connecting voltage 3x 400V 50 Hzxx
Net weight approx.kg16402700
TypHLS 3HLS 4
Passage between the columnsmm16402140
Sheet widthmm15202020
Punching forcekN250250
Smallest hole distance per punching unit frommm5050
Connecting voltage 3x 400V 50 Hzxx
Net weight approx.kg37704900

(Subject to constructional changes!)